home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.20000217-20000824
/
000352_news@columbia.edu _Mon Jun 5 19:38:48 2000.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Return-Path: <news@columbia.edu>
Received: from watsun.cc.columbia.edu (watsun.cc.columbia.edu [128.59.39.2])
by fozimane.cc.columbia.edu (8.9.3/8.9.3) with ESMTP id TAA07175
for <kermit.misc@cpunix.cc.columbia.edu>; Mon, 5 Jun 2000 19:38:48 -0400 (EDT)
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.59.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id TAA01009
for <kermit.misc@watsun.cc.columbia.edu>; Mon, 5 Jun 2000 19:38:47 -0400 (EDT)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.9.3/8.9.3) id TAA05582
for kermit.misc@watsun.cc.columbia.edu; Mon, 5 Jun 2000 19:30:48 -0400 (EDT)
X-Authentication-Warning: newsmaster.cc.columbia.edu: news set sender to <news> using -f
From: thoma <thomastk@hotmail.com>
Subject: File transfer to Acramatic 850 CNC machine controller
Date: Mon, 05 Jun 2000 23:21:54 GMT
Organization: Deja.com - Before you buy.
Message-ID: <8hhcm2$rbo$1@nnrp1.deja.com>
To: kermit.misc@columbia.edu
Hi:
I have this machine controller (Milacron Acramatic 850) compatible with
Kermit for file transfer. The current file transfer system on VMS works
fine. Currently, we are trying to add this machine to a web based DNC
system, using a terminal server that talks TCP/IP and connected to
Intranet.
A serial connection runs from the terminal server to the machine
controller. I can send files to the terminal server, but the data don't
get to the machine controller.
I don't know anything about Kermit. I wonder if there would be any
control characters required to be sent or serial side parameters need
to be setup, to initiate the dataflow between the terminal server and
Kermit-based machine controller.
What are RS492-2S and RS492-2M? Some documentation says that they are
the specific protocols used by the machine controller.
BTW, this setup works fine with RS232 serial connections on other
machine tools.
Any directions/suggestions to fix this problem will be highly
appreciated.
Thanks in advance
Thomas Theakanath
thomastk@hotmail.com
Sent via Deja.com http://www.deja.com/
Before you buy.